Durável D-Grip HD is a heavy-duty micronized polymer traction additive designed to increase slip resistance when mixed into concrete sealers and coatings. The polymer aggregate provides a more aggressive texture than standard D-Grip while mixing easily into the coating and remaining suspended with minimal additional stirring.
D-Grip HD is designed for professional concrete applications where additional traction is needed, including pool decks, driveways, sidewalks, stamped concrete, patios, garages, and other interior or exterior surfaces.
Key Features
- Heavy-duty traction additive
- Helps increase slip resistance of concrete coatings and sealers
- Mixes easily into compatible topcoats
- Designed to remain suspended with minimal additional stirring
- Provides traction with only a slight loss of gloss
- Suitable for interior and exterior applications
- Designed for professional contractor use
Durável states that the entire 30-ounce container can be added to a 5-gallon pail of sealer, which works out to the maximum 6 oz./gal rate.
How to Use
Shake the container before opening. Blend up to 6 ounces of D-Grip HD per gallon into the topcoat before application.
For two-component coatings, Durável instructs installers to first mix the coating according to its TDS and then add D-Grip, blending slowly to minimize air introduction.
Important: D-Grip HD is intended to be mixed into the topcoat. It should not be broadcast onto the surface.
Contractor Tip
For applications where more pronounced traction is required, choose D-Grip HD (20 mesh). For applications where a finer texture is preferred, Durável also offers standard D-Grip (50 mesh).